Portal Sync: Buses


Field

TME Field

Rules

Description

id N/A Internal ID. Is prohibited. Must not be present when Adding. Is required when Updating or Removing.
bus_num Bus Number RequiredMust not be greater than 12 characters.Must only contain letters and numbers.

Should be unique in the system.

Should be unique in the upload file.

The operator's identification of the vehicle.
bus_capacity Bus Capacity Must be a number. The seating capacity of the vehicle.
reg_no Rego Number Must not be greater than 100 characters. The vehicle's registration plate number.
is_low_floor Must be a number.Must be between 0 and 1. Flag to indicate the vehicle is a Low Floor Vehicle.
ac_check Airconditioned Must be a number.Must be between 0 and 1. Flag to indicate the vehicle has air conditioning.
wheelchair_check Wheelchair Must be a number.Must be between 0 and 1. Flag to indicate the vehicle supports wheelchair access.
organisation_id Organisation Must be a number.Must be a valid ID. The key of the organisation the vehicle is associated with. This can be found by downloading the Organisation list.
manufacturer_model Manufacturer/Model Must not be greater than 255 characters. The model of the vehicle. TVM Only
main_image N/A Image Must not be greater than 255 characters. The url of an image of the vehicle. TVM Only
current_odo Current odo Must be a number. The current reading of the vehicle's odometer. TVM Only
standing_capacity Standing Capacity Must be a number. The standing capacity of the vehicle. TVM Only
body_no Body No. Must not be greater than 255 characters. The body number of the vehicle. TVM Only
brand_id Chassis Type Must be a number.Must be a valid ID. The key of the brand the vehicle is associated with. Can be obtained by downloading the Vehicle list in TVM. TVM Only
vin_no Engine No. Must not be greater than 255 characters. The Engine number of the vehicle. TVM Only
chassis_no Chassis No Must not be greater than 255 characters. The chassis number of the vehicle. TVM Only
status N/A Internal Must be a number.Must be between 0 and 1. Flag to indicate whether the vehicle is active (1) or soft deleted (0).
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.